Using Doors, Stairs and Barriers

Video Tip - Go to the 4:30 mark of the video to view information on adding elements to Floorplans and manipulating them.

Our event floor plan design platform lets you add architectural elements like doors, stairs and columns as well as draperies and rope stanchions. You can customize the dimensions of these items to match your actual spaces and setups.

To Add a Door:

  1. Click on the "Floorplans" tool button on the Event Dashboard - OR - use the Quick Launch or Switch Event tool to select the appropriate Event and the "Floorplans" tool.
  2. Find the appropriate Floorplan to which you want to add elements and click on it.
  3. On the Floorplan Dashboard, select the "Library" tab in the left column and click on the "Doors, Stairs and Barriers" icon Doors-Stairs-Icon.png.
  4. Click-and-hold on the appropriate door element (Left Door, Right Door, Double Door) you want and drag it to where you want to place it on the Floorplan canvas (you can always move/adjust it later).
  5. A form will appear that lets you edit:
    • Door width
  6. Click "Save" when you are finished. You will be taken back to the Floorplan Dashboard where you can view and adjust the position of the item by dragging-and-dropping it.

To Add a Column:

  1. Click on the "Floorplans" tool button on the Event Dashboard - OR - use the Quick Launch or Switch Event tool to select the appropriate Event and the "Floorplans" tool.
  2. Find the appropriate Floorplan to which you want to add elements and click on it.
  3. On the Floorplan Dashboard, select the "Library" tab in the left column and click on the "Doors, Stairs and Barriers" icon Doors-Stairs-Icon.png.
  4. Click-and-hold on the appropriate column element (Square or Round) you want and drag it to where you want to place it on the Floorplan canvas (you can always move/adjust it later).
  5. A form will appear that lets you edit:
    • Dimension (width of one side for square, diameter for round) 
  6. Click "Save" when you are finished. You will be taken back to the Floorplan Dashboard where you can view and adjust the position of the item by dragging-and-dropping it.

To Add a Set of Stairs:

  1. Click on the "Floorplans" tool button on the Event Dashboard - OR - use the Quick Launch or Switch Event tool to select the appropriate Event and the "Floorplans" tool.
  2. Find the appropriate Floorplan to which you want to add elements and click on it.
  3. On the Floorplan Dashboard, select the "Library" tab in the left column and click on the "Doors, Stairs and Barriers" icon Doors-Stairs-Icon.png.
  4. Click-and-hold on the stairs element and drag it to where you want to place it on the Floorplan canvas (you can always move/adjust it later).
  5. A form will appear that lets you edit:
    • Tread depth
    • Tread width
    • Number of steps
  6. Click "Save" when you are finished. You will be taken back to the Floorplan Dashboard where you can view and adjust the position of the item by dragging-and-dropping it.

To Add a Rope With Stanchion:

  1. Click on the "Floorplans" tool button on the Event Dashboard - OR - use the Quick Launch or Switch Event tool to select the appropriate Event and the "Floorplans" tool.
  2. Find the appropriate Floorplan to which you want to add elements and click on it.
  3. On the Floorplan Dashboard, select the "Library" tab in the left column and click on the "Doors, Stairs and Barriers" icon Doors-Stairs-Icon.png.
  4. Click-and-hold on the rope-and-stanchion element and drag it to where you want to place it on the Floorplan canvas (you can always move/adjust it later).
  5. A form will appear that lets you edit:
    • Color
    • Rope section length
    • Number of rope sections
  6. Click "Save" when you are finished. You will be taken back to the Floorplan Dashboard where you can view and adjust the position of the item by dragging-and-dropping it.

To Add a Drapery:

  1. Click on the "Floorplans" tool button on the Event Dashboard - OR - use the Quick Launch or Switch Event tool to select the appropriate Event and the "Floorplans" tool.
  2. Find the appropriate Floorplan to which you want to add elements and click on it.
  3. On the Floorplan Dashboard, select the "Library" tab in the left column and click on the "Doors, Stairs and Barriers" icon Doors-Stairs-Icon.png.
  4. Click-and-hold on the drapery element and drag it to where you want to place it on the Floorplan canvas (you can always move/adjust it later).
  5. A form will appear that lets you edit:
    • Color
    • Drapery width
  6. Click "Save" when you are finished. You will be taken back to the Floorplan Dashboard where you can view and adjust the position of the item by dragging-and-dropping it.

To Edit/Duplicate/Delete a Single Element:

  1. Click on the appropriate element on the canvas.
  2. A dynamic menu of editing options will appear in the top-left of the canvas. To make an edit, click on the appropriate item. From left to right, the options include:
    Furniture-Elements-Edit-Single.png
    • Favorite - Adds the selected item to your Favorites library.
    • Edit - Opens the editing modal window.
    • Rotate - Lets you rotate the item up to 360 degrees.
    • Duplicate - Copies the item.
    • Color - Changes the color of the item.
    • Delete - Deletes the item.
    • Bring to Front - Places the item on top of overlapping elements.
    • Send to Back - Places the item behind overlapping elements.

To Edit/Duplicate/Delete/Realign Multiple Elements:

  1. Click on the first element you want to edit and then hold down on the "shift" key to select additional elements to edit - OR - click-and-drag your cursor over all the elements you wish to edit.
  2. A dynamic menu of editing options will appear in the top-left of the canvas. To make an edit, click on the appropriate item. From left to right, the options include:
    Furniture-Elements-Edit-Multiple.png
    • Rotate - Lets you rotate the items up to 360 degrees.
    • Duplicate - Copies the items.
    • Color - Changes the color of the items.
    • Delete - Deletes the items.
    • Bring to Front - Places the items on top of overlapping elements.
    • Send to Back - Places the items behind overlapping elements.
    • The rest of the options relate to re-aligning the selected items:
      • Align Left - Aligns all selected items with the furthest item to the left.
      • Align Horizontal Center - Centers all selected items horizontally at the point between the two items to the furthest left and furthest right.
      • Align Right - Aligns all selected items with the furthest item to the right.
      • Align Top - Aligns all selected items with the item closest to the top.
      • Align Vertical Center - Centers all selected items vertically at the point between the two items closest to the top and bottom.
      • Align Bottom - Aligns all selected items with the item closest to the bottom.
      • Distribute Horizontally - Equally distributes the selected items horizontally (left to right) between the two items furthest to the left and furthest to the right.
      • Distribute Vertically - Equally distributes the selected items vertically (top to bottom) between the two items closest to the top and bottom.
Have more questions? Submit a request

0 Comments

Article is closed for comments.